FLUG – A Bentley Institute Sponsored Users' Group

Agenda

"2022 FLUG Training Conference Agenda"


36

Engineering Partners

Tuesday Oct. 11, 2022 General Sessions

8:30AM - 9:30AM

Sand Dollar

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Civil 3D – Labeling – Concepts of Labels and Label Styles

Civl3D – Review labeling and syles to make production more efficient.

Mike Racca - FDOT

AutoCAD C3D

8:30AM - 9:30AM

Sea Oats

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – Plan Set Manager

A new tool in FDOTConnect that replaces the old GEOPAK Sheet Navigator

Matt Sexton - FDOT

FDOTConnect

8:30AM - 9:30AM

Starfish

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

What’s new in OBD?

This presentation will review all the new enhancements in OpenBridge Designer for this year releases.

Alex Mabrich - Bentley

OpenBridge Designer

8:30AM - 9:30AM

Sawgrass

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Geometry Rules and Relationshionships

Understanding Geometry parent/child relationships, how to build geometry in such a way that it maximizes efficiency when dealing with design changes.

Christiana Holmes - Bentley

OpenRoads Designer

8:30AM - 9:30AM

Dunes

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Corridor Side Slope Design and Modeling

This session focuses on practical ways to take advantage of the side slope modeling tools in OpenRoads Designer. Watch as we discuss and demonstrate various end condition capabilities in context of real-world examples. You’ll see examples of targeting 2D and 3D project features such as ROW and retaining walls, as well as matching slopes between corridors. In this session you will learn: (1)How to use various methods to target model elements and control end conditions, (2)How to tie end conditions to model elements (such as walls, abutments, and special ditches), and (3)To use target aliasing, end condition exceptions, and other end condition methods to create side slopes.

Jimmie Prow - Bentley

OpenRoads Designer

8:30AM - 9:30AM

Sundial

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

An Introduction to OpenRoads Designer Survey

An introduction to the survey capabilities in OpenRoads Designer.

Sonya Pieterse- Bentley

OpenRoads Designer

9:45AM - 10:45AM

Sand Dollar

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

You Want Me to Do What Now? – An Intro to Civil 3D

Introduction to Civil3D

Adam Farnsworth - Mead & Hunt

AutoCAD C3D

9:45AM - 10:45AM

Dunes

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* FDOT – Building Custom Drainage Features in OpenRoads Designer

Using OpenRoads and MicroStation to build custom 3D Drainage Structures

James Worley - FDOT

FDOTConnect

9:45AM - 10:45AM

Sawgrass

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Moving to BIM: How Organizations are moving from 2D Bridge Plans to Digital Deliverables

Private and government organizations are facing new challenges as they are required to apply the BIM methodology in their projects in which not only 3D models need to be submitted but still provide 2D plans. A new set of workflows, CADD standards and BIM standards need to be put in place before starting any project and at the same time dealing with software and hardware compliance and upskilling their personnel.

Alex Mabrich - Bentley

OpenBridge Designer

9:45AM - 10:45AM

Starfish

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Data Migration

New Tools and Workflows – Over the past several releases of OpenRoads Designer we have been adding more tools to make moving legacy data easier for the users. This session will highlight those tools and how to use them to migrate data.

Kevin Lusterio - Bentley

OpenRoads Designer

9:45AM - 10:45AM

Sundial

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

An Introduction to OpenSite Designer

Learn about Bentley Systems newest site planning and design software, OpenSite Designer. Discover the power of automated and optimized tools to see how it will shorten your design times and deliver better projects

Sonya Pieterse - Bentley

OpenSite Designer

9:45AM - 10:45AM

Sea Oats

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Grading – It’s not just Dirt

This presentation introduces some non-corridor approaches to solving advanced grading problems.

Christiana Holmes - Bentley

OpenRoads Designer

11:00AM - 12:00PM

Dunes

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – CADD Compliance Checklist Changes

Overview of Changes made the the Compliance Checklist and how it will impact you.

John Mark Palacios - FDOT

FDOTConnect

11:00AM - 12:00PM

Starfish

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Creating Tables and Reports

Learn how to quantify item types, edit items, use existing picklists, create various reports, spreadsheets and tables in the design. Learn to edit existing tables and to add useful functions like table breaks, plus much more.

Todd Holt - Bentley

OpenRoads Designer

11:00AM - 12:00PM

Sawgrass

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Customization of Footing Templates

Learn how to define templates for custom geometry footings and incorporate them into your standards.

Alex Mabrich - Bentley

OpenBridge Designer

11:00AM - 12:00PM

Sand Dollar

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

iTwin Design Review-Setting up your files

Learn the process to get your files to iTwin Design Review and hear tips and tricks for project success.

Rob Riley - Bentley

Bentley iTwin

11:00AM - 12:00PM

Sea Oats

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

What’s New in OpenRoads Designer 2022 – R1/R2

The presenter will be showcasing the latest additions to OpenRoads Designer

Jimmie Prow - Bentley

OpenRoads Designer

11:00AM - 12:00PM

Sundial

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Power Tools: Import and link Excel and Word into Revit, OpenRoads Designer, V8i, and AutoCAD with perfect formatting!

Microsoft Office Importer for MicroStation, Revit and AutoCAD.

For every project where you are not using Linked Data Manager (LDM)! Import perfectly formatted — and linked — Excel and Word data into CONNECT and V8i applications, Revit, and AutoCAD/Civil 3D with Axiom’s Microsoft Office Importer. MicroStation and Revit versions include ProjectWise support — automatically linking imported data in your DGNs and RVTs to Excel spreadsheets and Word documents stored inside ProjectWise. Learn how to shave man-weeks off your next project with Microsoft Office Importer for Revit, MicroStation, and AutoCAD.

Dan Kelly - Axiom

Axiom - Microsoft Office Importer

1:30PM - 2:30PM

Sawgrass

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

What Everyone Should Know about Civil AccuDraw

Every quality toolbox includes specialty tools that simplify specific tasks. You don’t need specialty tools all the time, but they offer substantial benefit when used purposefully. Civil AccuDraw is one of those tools. During this session we will discuss situations where Civil AccuDraw brings efficiencies that can be difficult with other tools.

Jordan Hartfield - Bentley

OpenRoads Designer

1:30PM - 2:30PM

Sea Oats

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Cross Section Annotation

An in-depth discussion of what is possible with cross section annotations and how to set them up to meet your requirements. This session is part presentation and part interactive Q&A.

Todd Holt - Bentley

OpenRoads Designer

1:30PM - 2:30PM

Sundial

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Enabling 3D Design Review and Collaboration with iTwin Design Review

Learn how iTwin Design Review enables a simplified, 2D/3D hybrid workflow for design review and collaboration. See how project teams can leverage a Digital Twin to easily share design context and provide review feedback on design deliverables through review, collaboration and quality tools.

Rob Riley - Bentley

Bentley iTwin

1:30PM - 2:30PM

Starfish

Tuesday-General Session

Novice - Expert

PSM CE Credits: 1

Seats Available:Open Seating

** Best practices for Survey deliverables

This presentation covers a thorough overview on the many high-value tools and techniques that surveyors demand when creating deliverables for designers.

Alvie Griffith - Bentley

OpenRoads Designer

1:30PM - 2:30PM

Dunes

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Future: Digital Delivery

Discussion of transportation industry and ultimate goal of FDOT CADD in reaching Model as the Legal Document

Vern Danforth - FDOT

FDOTConnect

1:30PM - 2:30PM

Sand Dollar

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Grading Design and Modeling at Bridge Abutments

In this session, we will demonstrate tools and techniques for modeling side slopes and grading around bridge abutments. You will learn how to define vertical elevations of 2D horizontal geometry, as well as use linear templates and end conditions to tie down slopes. Working between the multiple views of OpenRoads Designer, you will gain insight on viewing, analyzing, and modifying design elements, helping you incorporate bridge grading into your project design models.

Alex Mabrich - Bentley

OpenBridge Designer

2:45PM - 3:45PM

Starfish

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Item Type Fundamentals – Part 1

In this session you will learn about the fundamentals of using Item Types in OpenRoads Designer.

Topics:
•Item Type Properties •Pick Lists •Custom Property Types •Calculated Properties •Expression Builder •Lookup Expression

Jordan Hatfield - Bentley

OpenRoads Designer

2:45PM - 3:45PM

Sundial

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Road Characteristics from CAD Files

GDOT’s Office of Transportation Data wants to collect data from CAD files to determine road characteristics. There is a huge amount of information but most of the data is trapped in legacy projects with weakly attributed geometry. Using machine learning, advanced intercept algorithms, and digital twin (iTwin), we can group, classify, and report road properties. Come find out what we have learned and how we have approached these complex data capture challenges.

Mark Stefanchuk - PHOCAZ

MicroStation / Bentley iTwin

2:45PM - 3:45PM

Dunes

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Structures: Workflow Updates

Important new updates to various tools for Bridge Design, Modeling and Plans Production

Heather Piorun - FDOT

FDOTConnect

2:45PM - 3:45PM

Sea Oats

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Creating Plan Sheets for non-linear areas

Learn how to create plan sheets for non-linear areas such as site development, intersections, and parking areas.

Jordan Hartfield - Bentley

OpenRoads Designer

2:45PM - 3:45PM

Sand Dollar

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* With OpenRoads Designer an ordinary design becomes your Interoperable Data

We discuss how Item Types and iTwin Design Review enhance and support interoperability of your digital deliverables.

Christiana Holmes - Bentley

OpenRoads Designer

2:45PM - 3:45PM

Sawgrass

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

An Overview of Bluebeam Revu

This presentation will cover some of Bluebeam Revu’s features and best-practices when first using the program to manage your PDFs. We’ll learn about customizing our interface and tools, along with the Comparison and Overlay functions. We’ll also demonstrate the Dynamic Fill tool, Visual Search, and how to work on the same PDF at the same time with your colleagues via Bluebeam Studio Sessions.

Ariel Rejtman - Digital Drafting Systems, Inc.

Bluebeam

4:15PM - 5:15PM

Dunes

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Structures: Automated Bridge Quantities

How to build the Summary of Structures from OpenBridge Modeler with FDOTConnect

Kandi Daffin - FDOT

FDOTConnect

4:15PM - 5:15PM

Sundial

Tuesday-General Session

Novice - Expert

PSM CE Credits: 1

Seats Available:Open Seating

** Editing Survey Features Using Point Lists

This course focuses on how to easily correct erroneous survey linework by converting the Linking Code survey features to Point List Features and then editing the features. We will focus on converting Linking Code Features to Point List Features and then editing the Point List Features.

Alvie Griffith - Bentley

OpenRoads Designer

4:15PM - 5:15PM

Sea Oats

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Roadway Plans Methodology and More

Best practices, tips and workflows for creating and managing plan sheets assembly.

Jimmie Prow - Bentley

OpenRoads Designer

4:15PM - 5:15PM

Starfish

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

What’s new in MicroStation CONNECT Update 17

Learn what’s new and added in MicroStation CONNECT Edition Update 17 that will increase your productivity and save time. You’ll hear about the latest improvements and workflows in MicroStation CONNECT Edition Update 17.

Dan Eng / Tamicca Sellars - Bentley

MicroStation CE

4:15PM - 5:15PM

Sawgrass

Tuesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Item Type Fundamentals – Part 2

In this session, we will focus on how to use Item Types with civil data and show how you can leverage Item Types for quantities and reporting.
Topics:
•Item Types with Feature Definitions •Single Source of Truth •Propagation, Prioritization, and Conflict Resolution •Asset Manager •Annotation and Labeling •Display Styles and Display Rules •Items Browser •Reports

Jordan Hatfield - Bentley

OpenRoads Designer

4:14PM - 5:15PM

Sand Dollar

Tuesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Dictate Your Ribbon Don’t Let it Dictate You

Tired of always searching for common tools you use daily on separate tabs in your ribbon? Tailor your ribbon to show the tools you use most with this guide to create a customized workflow that features a tool ribbon tailored to your specific needs.

Andrew Easley - Mead & Hunt

OpenRoads Designer

Tuesday Oct. 11, 2022 Workshops

8:30AM - 5:15PM

Horizon

Tuesday Workshop - $125

*T-1-H

Novice - Expert

PDH Credits : 6

Seats Available:0

*T-1-H: FDOT Connect – Roadway Design 3D Modeling

Learn the tools for design and modeling within the FDOTCONNECT workspace.

Errick Gray - ACEC

OpenRoads Designer

8:30AM - 10:45AM

Sandcastle II

Tuesday Workshop - $75

** T-1-SC II

Novice - Expert

PSM CE Credits : 2

Seats Available:0

** T-1-SC II: Importing and Reviewing Survey Data

This course will cover the most basic of survey operations: Importing and reviewing survey data collected in the field.
We will start with setting up a project seed file with the proper geographical coordinate system and then show several methods for importing survey data. We will examine how different file types can be processed differently. We will also examine the configuration and setup of the import process.

Alvie Griffith - Bentley

OpenRoads Designer

8:30AM - 12:00PM

Sandcastle I

Tuesday Workshop - $100

* T-1-SC I

Novice - Expert

PDH Credits : 3

Seats Available:14

* T-1-SC I: Latest features and methods for Feature Extraction using Point-Clouds for TopoDOT Users

Learn the latest techniques to improve your corridor feature extraction process. This session is a summary of the recent changes and updates to the Main Extraction tools in TopoDOT® such as the Drape Element to Data, Asset Identification, Extraction by Intensity and more. This session is a great opportunity to increase your productivity with a few tips and tricks we have in store for TopoDOT Users. Note: Since this is a TopoDOT users’ workshop, it’s recommended to have some experience with the software in order to attend.

Jean Hernandez - TopoDOT

TopoDOT

8:30AM - 10:45AM

Seahorse

Tuesday Workshop - $75

T-1-SH

Novice - Expert

PDH Credits : N/A

Seats Available:15

T-1-SH: OpenBuildings Designer: Modeling and BIM Essentials of a 3D Transit Station

This new hands-on session contains exercises for getting started with Bentley’s BIM solution, OpenBuildings Designer. The students will learn basic modeling techniques for working in a 3D environment and explore the workflow of creating an intelligent model for a small above ground transportation station.  Exercises start with a creating a conceptual block model, working with site files (geo-referencing), and then modeling columns, beams, walls, doors, windows, and curtain walls.

Mark Enos - Bentley

OpenBuildings for Transportation

11:00AM - 2:30PM

Sandcastle II

Tuesday Workshop - $75

* T-2-SC II

Novice - Expert

PDH Credits : 2

Seats Available:0

* T-2-SC II : Detecting and Managing Utility Conflicts

In this course, you will learn how to identify hard and soft conflicts of underground utilities.

Jordan Hatfield - Bentley

OpenRoads Designer

11:00AM - 2:30PM

Seahorse

Tuesday Workshop - $75

* T-2-SH

Novice - Expert

PDH Credits : 2

Seats Available:0

* T-2-SH: Overlay, Stripping and Widening

You will learn the basics of placing civil cells. This includes gaining an understanding of what civil cell references are and how to use them in a practical workflow. You will learn to use the civil cells delivered with the product, as well as how to use civil cells taken from external sources and incorporate them into your models. You will learn to edit and re-use civil cells that have been placed within a model.

Christiana Holmes - Bentley

OpenRoads Designer

1:30PM - 5:15PM

Sandcastle I

Tuesday Workshop - $100

T-2-SC I

Novice - Expert

PDH Credits : 3

Seats Available:14

*T-2-SC I: Takeoffs, Estimating, Alignments and Models: Trimble TEAM Software Overview

Using Trimble software – with a hands-on 3 hour lab. Users will digitize Takeoff Data, Estimate earthwork quantities, enter Roadway Alignments and create 3D Models for field GPS applications. We will cover the high level use of the software to understand how you can use TBC for many construction software applications including Quadri.

Mike Eason & Scott Bridges - Trimble

Trimble

2:45PM - 5:15PM

Sandcastle II

Tuesday Workshop - $75

* T-3-SC II

Novice - Expert

PDH Credits : 2

Seats Available:0

*T-3-SC II: Creating and Editing Centerline Geometry

In this course, you will learn how to create and edit horizontal and vertical geometry using various tools and techniques. You will be defining the horizontal and vertical geometry for River Rd. You will also learn how to make changes to the River Rd. geometry and how to make changes to the existing geometry for Mountain Highway and Pike Rd.

Todd Holt - Bentley

OpenRoads Designer

2:45PM - 5:15PM

Seahorse

Tuesday Workshop - $75

*T-3-SH

Novice - Expert

PDH Credits : 2

Seats Available:0

*T-3-SH: Intersection Design – 3D Model Detailing

This course teaches tools and techniques that can be used to accurately model a complex intersection in 3D. In this course, you will learn how to:
Use Linear Templates to create the curb, sidewalk and side slope grading along the edges of pavement and islands.
Use Surface Templates to apply material thickness to the pavement surface and median islands.
Create a Finished Grade Terrain Model using Graphical Filters.
Export Finished Grade Terrain Model to LandXML format.

Sonya Pieterse - Bentley

OpenRoads Designer

Wednesday Oct. 12, 2022 General Sessions

9:45AM - 10:45AM

Starfish

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Traffic Tool Update

Review of FDOT Traffic Tools

Randy Roberts - FDOT

FDOTConnect

9:45AM - 10:45AM

Sawgrass

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – CADD Model Element Properties

CADD Features built with Properties for Asset Information

Kandi Daffin/Vern Danforth - FDOT

FDOTConnect

9:45AM - 10:45AM

Dunes

Wednesday-General Session

Intermediate - Expert

PDH Credits : N/A

Seats Available:Open Seating

Sheet Seed Creation Advanced Tips and Tricks

A lot has changed over the past few years regarding the creation of Sheet Seed Definition DGNLibs. In this presentation we will look at some of the new techniques for sheet seed creation.
One area of focus will be placing multiple sheet seed definitions into the same DGNLib. This will speed up workspace load times and increase speeds switching between files.
Topics covered:
•Putting all sheet seed definitions into a single DGNLib
•Utilizing a backup system through the creation process
•Changing the reference attachment view settings
•Renaming
•Removing and replacing an invalid sheet seed definition
•Changing the assigned annotation group
•Important discussion on Units of Resolution
•Additional tips

Jimmie Prow - Bentley

OpenRoads Designer

9:45AM - 10:45AM

Sea Oats

Wednesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Above and Beyond Corridor Modeling

A “deep dive” presentation into corridor modeling methods that you may have never thought possible.

Kevin Lusterio - Bentley

OpenRoads Designer

9:45AM - 10:45AM

Sand Dollar

Wednesday-General Session

Novice - Expert

PSM CE Credits : 1

Seats Available:Open Seating

** Using Geometry Builder to Define (Right of Way) Geometry

Learn the power of the Geometry Builder to define and edit geometry. Specifically we will explore how to create existing and proposed right of way lines and existing property parcel from record data during this session.

Alive Griffith - Bentley

OpenRoads Designer

9:45AM - 10:45AM

Sundial

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Digitally Sign & Seal Documents for Submittal to FDOT with Bluebeam Revu

The Florida Department of Transportation (FDoT) requires that all submittals are digitally signed and sealed with third-party authenticated signatures. This presentation will explain the process and demonstrate a concise and consistent set of methods for digitally signing submittals properly. Ari Rejtman, a Bluebeam Certified Instructor with Digital Drafting Systems, has worked with many municipalities and trained them in the procedure for sending and receiving documents. Submittal markups can be flattened before being signed, and shop drawing stamps and official seals can be included in digital signatures.

Ariel Rejtman - Digital Drafting Systems, Inc.

Bluebeam

11:00AM - 12:00PM

Sea Oats

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – General Workspace Setup Configuration and Troubleshooting

Review of FDOT workspace setup, configurations, and general troubleshooting

Matt Sexton - FDOT

FDOTConnect

11:00AM - 12:00PM

Sawgrass

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Civil 3D -Code Set Styles for Assemblies and Sub-Assemblies

Civil3D – Code Set Styles for assemblies and sub-assemblies.

Mike Racca - FDOT

FDOT C3D

11:00AM - 12:00PM

Sand Dollar

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

ProjectWise: The Benefits of Plotting ORD Files with ICS for PDF

Benefits of plotting ORD files with ICS for PDF

Arbie Parker - Bentley

ProjectWise

11:00AM - 12:00PM

Sundial

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Project data flow through digital asset lifecycle management

Throughout the project lifecycle, data is being created or collected. From design data to inspection forms, there are a variety of data sources and formats requiring different accessibility and interaction.
Access to data and collaboration play a key role in the success of a project the Trimble way, under budget and ahead of schedule promoting communication, efficiency, and sustainability.
In this session, we will follow a real example of data workflow through design, site data collection and eventually maintenance of a project. Quadri, connecting our field and software solutions to one another and with third party integrations, is an integral part of this seamless workflow.

Mike Eason & Scott Bridges - Trimble

Trimble

11:00AM - 12:00PM

Starfish

Wednesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* OpenBuildings Designer – Information Modeling in 3D of a Transit Station

Learn about creating the building base geometry, Column Grid and Walls, creating the building base-generating geometry, doors, windows and wall cleanup, annotating and dimensioning the building base, producing project deliverables, creating and printing Cut Sheets from Project Data.

Mark Enos - Bentley

OpenBuildings Designer

11:00AM - 12:00PM

Dunes

Wednesday-General Session

Novice - Expert

PSM CE Credits : 1

Seats Available:Open Seating

** Understanding Survey Feature Definitions

This course will review how raw field codes are mapped into a DGN file when processed with the Survey product. It will show the relationship between field codes and Feature Definitions that have been configured to display various survey features and how to control those settings.

Alvie Griffith - Bentley

OpenRoads Designer

1:30PM - 2:30PM

Sundial

Wednesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* OpenBuildings Designer for Road Infrastructure – Design of Support Buildings and Structures

OpenBuildings Designer is a scalable, multi-discipline building design application that enables BIM workflows to develop and design buildings of any size or complexity from support buildings such as toll plazas, vehicular maintenance buildings, comfort stations and weigh stations.  Bentley’s federated BIM approach allows quick design alternative exploration and adaptive re-use.

Mark Enos - Bentley

OpenBuildings Designer

1:30PM - 2:30PM

Sea Oats

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – Plan Label Automation Tools

FDOT – Annotation Manager
FDOT – Text Favorite Manager
FDOT – Civil Label Manager

Chris Thorp - FDOT

FDOTConnect

1:30PM - 2:30PM

Sand Dollar

Wednesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Save time & money with parametric workflows for 3D/FEA modeling & design code checks

This session describes a holistic approach to bridge analysis and design with OpenBrIM Platform technology. The proposed approach promotes data-rich models to create a true digital twin where any parameter changes in the 3D model & FEM are applied concurrently, design/code check reports and the workflows can be generated parametrically, customized, and reused. It brings valuable efficiency to analysis and design processes, design-build projects, and digital twin practices by automating the iterative tasks for bridge engineers and making the level of detail flexible for all stakeholders.

Cagin Yakar - OpenBrIM Platform

OpenBrIM Platform

1:30PM - 2:30PM

Sawgrass

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Pushin’ Dirt – Grading Tricks in Civil 3D

Grading optomization

Adam Farnsworth - Mead & Hunt

AutoCAD C3D

1:30PM - 2:30PM

Starfish

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

ProjectWise: Configuring Rules-Based Workflows in ProjectWise

Configuring rules-based workflows in ProjectWise.

Arbie Parker - Bentley

ProjectWise

1:30PM - 2:30PM

Dunes

Wednesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Florida DOT Roadway Volume Verification Software

Using Trimble Business Center, the Florida Roadway CAD cross sections and surface models can be imported and used to create Earthwork volumes. We will walk through a few samples of importing data and verifying Roadway volumes with Station by Station Cross Section reports and Surface to Surface Volume calculations.

Scott Bridges & Mike Eason - Trimble

Trimble

2:45PM - 3:45PM

Dunes

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT-CADD QC

FDOT reviews tools and procedures for CADD Compliance inside OpenRoads Designer

Brandon Welch - FDOT

FDOTConnect

2:45PM - 3:45PM

Starfish

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

AutoCAD C3D

2:45PM - 3:45PM

Sawgrass

Wednesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Analysis & Design- Complex Curved Steel I Girder Bridge – OpenBrIM workflow and design code checks

In this session, OpenBrIM will demonstrate how to analyze and design a Complex Curved Steel I Girder Bridge utilizing the reusable parametric workflow. The demo includes entering bridge geometry, superstructure, and substructure data, generating construction stages, and running the FEA on the cloud to get detailed analysis results including influence surface-based live load analysis and staged construction analysis, and finally how to read the design code check reports.

Cagin Yakar - OpenBrIM Platform

OpenBrIM Platform

2:45PM - 3:45PM

Sand Dollar

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

ProjectWise: Delivering Deliverables with PWDM

Delivering deliverables with ProjectWise Deliverables Management

Arbie Parker - Bentley

ProjectWise

2:45PM - 3:45PM

Sundial

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Digital Design & Construction workflows including latest technology preview

This session focuses on Trimble’s newest core technologies Quadri & SiteVision that are pivotal in both the storage, sharing, translating, and collaboration as well as visualization of 3D Construction data, and their associated Digital Workflows.

Adrien Patane' - Trimble

Trimble

2:45PM - 3:45PM

Sea Oats

Wednesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Understanding Terrain Models

Learn the tools and techniques behind these dynamic terrain models as well as the do’s and don’ts with managing multiple terrain models.

Kevin Lusterio - Bentley

OpenRoads Designer

4:15PM - 5:15PM

Sawgrass

Wednesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Plans Production with OBM

Let’s review the plans production process for the creation of bridge deliverables and the tools available in the software to accomplish that. Topics include:Review of Model Types, Dynamic View Workflow, Review of Detailing Symbol Styles, Review of Display Styles, Specialized OBM Drawing Production Tools

Steve Willoughby - Bentley

OpenBridge Modeler

4:15PM - 5:15PM

Sundial

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Workspace Conversion – Survey Foot to International Foot

National Institute of Standards and Technology (NIST) is retiring the Survey Foot exception at the end of 2022.
Many State Agencies WorkSpaces are developed using Survey Foot and these workspaces need to cater for the use of International Feet

Jimmie Prow - Bentley

General

4:15PM - 5:15PM

Sand Dollar

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Use iTwin Design Review to Share and Collaborate on Design Models

iTwin Design Review is an exciting new tool that allows designers to easily share and collaborate directly from their design models. Purpose built
for how you work, our unique, hybrid 2D/3D design review environment enables you to conduct faster review sessions on design work-inprogress, while minimizing intermediate steps, artifacts, and ad hoc workarounds. Come learn how to coordinate faster reviews and eliminate intermediate steps with iTwin Design Review.

Rob Riley - Bentley

Bentley iTwin

4:15PM - 5:15PM

Starfish

Wednesday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* 3D Modeling for Non-Modelers QC

This session is tailored for professional engineers that will be required to sign and seal 3D deliverables and professionals in charge of design QC. Tools to review the design will be explored and demonstrated as well as some tips and tricks to make sure there are no errors or that errors will be identified in early stages of the design process.

Emmanuel Marin - BCC Engineering

OpenRoads Designer

4:15PM - 5:15PM

Sea Oats

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT CADD Delivery; including BIM files for Earthwork

Overview of CADD Delivery requirements and new updates to the CADD Manual

John Mark Palacios - FDOT

FDOTConnect

4:15PM - 5:15PM

Dunes

Wednesday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Templates Deconstructed

The discussion will cover tips, techniques and challenges to consider when developing OpenRoads Designer workspaces.

Christiana Holmes - Bentley

OpenRoads Designer

Wednesday Oct. 12, 2022 Workshops

9:45AM - 12:00PM

Seahorse

Wednesday Workshop - $75

* W-1-SH

Novice - Expert

PDH Credits : 2

Seats Available:0

* W-1-SH: Creating a Terrain from Point Cloud Data

This course will cover how to create a terrain model from point cloud data. You will learn how to attach point cloud data, view the point cloud data, create the terrain model from the point cloud data and also how to add breaklines to the point cloud terrain model. You will also learn how to combine and merge point cloud data with field survey data to create a complex terrain model.

Todd Holt - Bentley

OpenRoads Designer

9:45AM - 5:15PM

Horizon

Wednesday Workshop - $125

* W-1-H

Novice - Expert

PDH Credits : 5

Seats Available:0

* W-1-H: FDOT Connect – Plan Development Workflows

Learn the tools for Plans Development workflows for FDOT projects.

Krissy Hoffman - ACEC

OpenRoads Designer

9:45AM - 12:00PM

Sandcastle I

Wednesday Workshop - $75

* W-1-SC I

Novice - Expert

PDH Credits : 2

Seats Available:3

* W-1-SC I: Analyzing Larger Storm Events

In this class you will learn how to analyze whether a system that has been designed for one storm event will cater for a larger storm event and climate change. This class also shows you how to stress test a system, to see how well it will cope if it is not properly maintained, and how to change individual pipes to improve the situation, without redesigning the whole system.

Christiana Holmes - Bentley

MicroStation CONNECT

9:45AM - 12:00PM

Sandcastle II

Wednesday Workshop - $75

* W-1-SC II

Novice - Expert

PDH Credits : 2

Seats Available:0

* W-1-SC II: Modeling PC Bridges. Updated

Develop a multi-span prestressed girder bridge using LEAP Bridge Concrete. We will explore the use of different super and substructure templates and how to modify them, create geometry reports, convert the 3D physical model into an analytical model, and analyze it using the LRFD code. Additionally, we will create drawings and share best practices for project deliverables

Alex Mabrich - Bentley

OpenBridge Designer

1:30PM - 5:15PM

Seahorse

Wednesday Workshop - $100

** W-2-SH

Novice - Expert

PSM CE Credits : 3

Seats Available:0

** W-2-SH: Right of Way Fundamentals

The objective of this course is to teach tools and techniques that can be used for developing Right of Way Plans on roadway projects. In this
course you will learn how to establish the existing right of way centerline, how to create the existing right of way lines and how to create an
existing property parcel from record data. You will also learn how to create proposed right of way lines, a proposed parcel, and legal
description. And lastly, you learn how to create right of way plan sheets and annotation.

Alvie Griffith - Bentley

OpenRoads Designer

1:30PM - 5:15PM

Sandcastle II

Wednesday Workshop - $100

W-2-SC II

Novice - Expert

PDH Credits : N/A

Seats Available:5

W-2-SC II : Photorealistic Rendering and Animation in MicroStation CONNECT Edition.

This courses will teach you how to incorporate Visualization and Animation in your 3D Models. Learn how to setup a camera, assign materials, setup your lighting and how to do Basic Keyframe animation.

Steve Rick - Bentley

MicroStation CONNECT

1:30PM - 5:15PM

Sandcastle I

Wednesday Workshop - $100

W-2-SC I

Novice - Expert

PDH Credits : N/A

Seats Available:0

W-2-SC I : Getting Started with 3D in MicroStation CONNECT Edition

This course is for MicroStation CONNECT users from any discipline, modeling in 3D and using meshes along with solids and surfaces. It covers various methods of Mesh creation such as from a pair of Curves, Contours, Points, Grid etc. Subsequent mesh operations like Trim, Extrude, Boolean Difference (Subtract), Project, Analyse (Measure Volume) etc. are covered.

Dave Mayer - Bentley

MicroStation CONNECT

Thursday Oct. 13, 2022 General Sessions

8:30AM - 9:30AM

Sawgrass

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* A Practical Approach to Precise Slopes

To grade a slope, it takes an understanding of a single slope, but to grade a compound slope, it takes an understanding of two slopes. We will discuss what a compound slope is, how to calculate it, and how to work with the compound slope in grading.

Chuck Turlington - Geosyntec Consultants

OpenRoads Designer

8:30AM - 9:30AM

Sand Dollar

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT/Trimble – Quadri

FDOT Pilot Project overview with Quadri

Vern Danforth - FDOT

FDOTConnect

8:30AM - 9:30AM

Sea Oats

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Meshin’ Around with OpenRoads Designer

This presentation will cover the many nuances with computing quantities and calculating earthwork such as unsuitable materials, multiple substrata, and complex volumes with meshes.

Todd Holt - Bentley

OpenRoads Designer

8:30AM - 9:30AM

Dunes

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Identify and Manage Utility Clashes in Transportation Projects

What a 3D model‐based workflow may look like for the average DOT using the 3D modeling and analysis workflows inside OpenRoads Designer Drainage and Utilities to help identify and manage utility conflicts on transportation projects.
•How to import drainage/utility data using ModelBuilder • How to create 3D drainage/utility model from CAD graphics or survey •How to use the utility conflict detection tool •How custom properties (UDX and/or Item Types) can be used to document and manage utility conflict status •How to leverage the default and custom utility properties for reporting and data retention purposes

Rob Riley - Bentley

OpenRoads Designer

8:30AM - 9:30AM

Starfish

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Draining a Road Surface Effectively

In this presentation we will look at how to optimize the position of inlets to effectively drain the road surface, including checking that spread width constraints have been adhered to along the gutter, and not just at the inlet.

Christiana Holmes - Bentley

OpenRoads Designer

8:30AM - 9:30AM

Sundial

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Road Characteristics from CAD Files (Repeat)

GDOT’s Office of Transportation Data wants to collect data from CAD files to determine road characteristics. There is a huge amount of information but most of the data is trapped in legacy projects with weakly attributed geometry. Using machine learning, advanced intercept algorithms, and digital twin (iTwin), we can group, classify, and report road properties. Come find out what we have learned and how we have approached these complex data capture challenges.

Mark Stefanchuk - PHOCAZ

MicroStation / Bentley iTwin

9:45AM - 10:45AM

Sand Dollar

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Matterport – 3D Scanning (Buildings)

Transform any jobsite into a dimensionally-accurate digital twin with Matterport! Come see a live demonstration of scanning a space and find out how creating a walk-through model can save time and effort for anyone working on a job. We’ll show how to extract point clouds of the model, and the best practices for scanning a space.

Adam Farnsworth - Mead & Hunt

3D Scanning

9:45AM - 10:45AM

Dunes

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Creating Drainage Reports

In this course, you will learn how to create reports using FlexTables. You will learn how to customize the FlexTables to show the desired data fields and formatting for the reports. FlexTables show data for one type of element – a catch basin or a manhole for example. You will learn how to combine the content of multiple FlexTables into a single Excel spreadsheet.

Jordan Hatfield - Bentley

OpenRoads Designer

9:45AM - 10:45AM

Sawgrass

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

What’s New in OpenRoads Designer 2022 – R1/R2 (Repeat)

The presenter will be showcasing the latest additions to OpenRoads Designer

Christiana Holmes - Bentley

OpenRoads Designer

9:45AM - 10:45AM

Sea Oats

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – Plan Set Manager (repeat)

A new tool in FDOTConnect that replaces the old GEOPAK Sheet Navigator

Matt Sexton - FDOT

FDOTConnect

9:45AM - 10:45AM

Sundial

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Managing Construction Data in the Cloud (from the Office to the Field)

Safety, Sustainability, Efficiency, Speed and Economics. Construction Data can now be sent over the cloud from the office to the field. Trimble will discuss and present how to manage the data workflow process. We will discuss best practices, the various software options and more to help show what the future of construction data and workflows look like.

Ev Tripolitis - Trimble

Trimble

9:45AM - 10:45AM

Starfish

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

An Overview of Bluebeam Revu (Repeat)

This presentation will cover some of Bluebeam Revu’s features and best-practices when first using the program to manage your PDFs. We’ll learn about customizing our interface and tools, along with the Comparison and Overlay functions. We’ll also demonstrate the Dynamic Fill tool, Visual Search, and how to work on the same PDF at the same time with your colleagues via Bluebeam Studio Sessions.

Ariel Rejtman - Digital Drafting Systems, Inc.

Bluebeam

11:00AM - 12:00PM

Sea Oats

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – Automated Quantities FAQs

Join Kandi as she share frequentley asked questions and troubleshooting tips.

Kandi Daffin - FDOT

FDOTConnect

11:00AM - 12:00PM

Sundial

Thursday-General Session

Novice - Expert

PSM CE Credits : 1

Seats Available:Open Seating

** Using Geometry Builder to Define (Right of Way) Geometry (Repeat)

Learn the power of the Geometry Builder to define and edit geometry. Specifically we will explore how to create existing and proposed right of way lines and existing property parcel from record data during this session.

Alive Griffith - Bentley

OpenRoads Designer

11:00AM - 12:00PM

Sand Dollar

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Data Comparison and Applications of UAS Imagery and LiDAR Systems

In recent years the geospatial drone market has expanded dramatically. Drone based UAS LiDAR and Imagery systems vast differences make it difficult to choose the right solution. This presentation aims to explore their differences from the point cloud processing aspect. We will examine the pros and cons of each system’s dataset for practical survey and mapping applications such as topographies, bare earth, volumetrics, etc. Learn how data accuracy, density, intensity/color and other data characteristics affect a deliverable. We’ll also show who to evaluate whether the data meets quality requirements for a certain application, and if it is suitable for automated feature extraction. Examples of automated extraction of break lines, surface models and asset identification will be demonstrated. Additionally, we will discuss the role of drone systems in supplementing other platforms for fusion projects and show some successful case studies.

Jean Hernandez - TopoDOT

TopoDOT

11:00AM - 12:00PM

Starfish

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

All about 3D Scanning

Anything related to 3D Scanning, reverse engineering and dimensional inspection. We have done presentations to user groups in the past. A good one we do is discuss the difference types of 3D scanning equipment, applications, software and uses. Here is a link to a great video showing some of the equipment we use and applications.

Mark Kemper - EMS, Inc.

3D Scanning

11:00AM - 12:00PM

Dunes

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Drainage Plans Production

In this session, you will learn how to create and annotate plan, profile and cross section sheets. You will learn how to create Named Boundaries that will be used to generate plan, profile and cross section sheets. You will also learn about drawing models and sheet models that are used during the sheet creation process. Lastly, you will learn how to add individual annotations to label specific location coordinates, station‐offset values, elevations, and more.

Jordan Hatfield - Bentley

OpenRoads Designer

11:00AM - 12:00PM

Sawgrass

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT/Bentley – SYNCHRO

FDOT Pilot Project overview with SYNCHRO

Vern Danforth - FDOT / Dan Sheldon - Bentley

Bentley SYNCHRO

1:30PM - 2:30PM

Sawgrass

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – CADD Compliance Checklist Changes (repeat)

Overview of Changes made the the Compliance Checklist and how it will impact you.

John Mark Palacios - FDOT

FDOTConnect

1:30PM - 2:30PM

Sea Oats

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Roadway Plans Methodology and More (repeat)

Best practices, tips and workflows for creating and managing plan sheets assembly.

Jimmie Prow - Bentley

OpenRoads Designer

1:30PM - 2:30PM

Starfish

Thursday-General Session

Novice - Expert

PSM CE Credits: 1

Seats Available:Open Seating

** Using Point-Clouds Beyond Survey

Looking to get more out of your data past “as built” surveys? Want to leverage your pointcloud for the design process? Learn about the latest data analysis and monitoring tools available for you in TopoDOT®. The presenters will demonstrate examples of the Speed Advisory tool to analyze speed based on the road curvature, gathering roadway geometry and critical measurements, as well as the Road Condition Analysis to detect and report pavement surface distress and more. Updates on other analysis tools will also be demonstrated. Don’t miss the opportunity to discover new ways to expand your business with tools you already own.

Jean Hernandez - TopoDOT

TopoDOT

1:30PM - 2:30PM

Sand Dollar

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Coordinate Transformation

Review the basic concepts of transformations and how these work in Civil 3D and with a 4 parameter 2d conformal transformation. Perform a manual transformation from plant to state plane coordinates. Also review the NGS tools for calculating the transformation on your 2d or 3d point data.

Chuck Turlington - Geosyntec Consultants

Civl 3D

1:30PM - 2:30PM

Dunes

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Annotating Drainage Profiles

If you ever wondered how to create drainage pipe profiles and annotate drainage structures? Then this session is for you. This presentation will discuss: creating pipe profiles using the
Drainage and Utilities tools, creating Named Boundaries that will be used to place those pipe profiles on sheets and how to add individual annotations to label specific location coordinates, station, elevations, and more.

Jordan Hatfield - Bentley

OpenRoads Designer

1:30PM - 2:30PM

Sundial

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

SYNCHRO Model considerations for Construction

Bentley construction management platform is a robust system to streamline activities from pre-construction to construction execution. Get an overview of the product line and how Bentley provides a “single source of truth” across the entire portfolio, from a 2D, 3D, or 4D/5D workflow.

Dan Sheldon - Bentley

Bentley SYNCHRO

2:45PM - 3:45PM

Sawgrass

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Drainage – Plans Production Tips and tricks

Tips and tricks using OpenRoads Designer Drainage and Utilities for plans production

Christiana Holmes - Bentley

OpenRoads Designer

2:45PM - 3:45PM

Sand Dollar

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* FDOT – Building Custom Drainage Features in OpenRoads Designer (repeat)

Using OpenRoads and MicroStation to build custom 3D Drainage Structures

James Worley - FDOT

FDOTConnect

2:45PM - 3:45PM

Sea Oats

Thursday-General Session

Expert

PDH Credits : N/A

Seats Available:Open Seating

Advanced Template Tips and Tricks

Take a deep dive with some of the more advanced and complex nuances of template design. From multi-layered display rules and template math to 3D line styles and annotation, there is plenty to uncover. Please note that this is an ADVANCED template course and will assume you have a basic understanding of roadway templates.

Andrew Poszich & Thomas Anzelone - RS&H

OpenRoads Designer

2:45PM - 3:45PM

Dunes

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Creating Plan Sheets for non-linear areas (Repeat)

Learn how to create plan sheets for non-linear areas such as site development, intersections, and parking areas.

Jordan Hartfield - Bentley

OpenRoads Designer

2:45PM - 3:45PM

Sundial

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

SYNCHRO Construction Solution

We have created some great designs. Now, take the design to the field with SYNCHRO; whether it’s a 2D, 3D, or hybrid deliverable. See how the field data is collected, the project tasks and schedule are managed, and how issues or RFI’s may be sent for review all in a single connected system, whether it is a scheduling issue or a design RFI. Learn about these tools to bridge the divide between design and construction.

Dan Sheldon - Bentley

Bentley SYNCHRO

2:45PM - 3:45PM

Starfish

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Digitally Sign & Seal Documents for Submittal to FDOT with Bluebeam Revu (Repeat)

The Florida Department of Transportation (FDoT) requires that all submittals are digitally signed and sealed with third-party authenticated signatures. This presentation will explain the process and demonstrate a concise and consistent set of methods for digitally signing submittals properly. Ari Rejtman, a Bluebeam Certified Instructor with Digital Drafting Systems, has worked with many municipalities and trained them in the procedure for sending and receiving documents. Submittal markups can be flattened before being signed, and shop drawing stamps and official seals can be included in digital signatures.

Ariel Rejtman - Digital Drafting Systems, Inc.

Bluebeam

4:15PM - 5:15PM

Sawgrass

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – BIM360

FDOT shares BIM360 overview.

Vern Danforth - FDOT

FDOTConnect

4:15PM - 5:15PM

Sand Dollar

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Florida DOT Roadway Volume Verification Software (repeat)

Using Trimble Business Center, the Florida Roadway CAD cross sections and surface models can be imported and used to create Earthwork volumes. We will walk through a few samples of importing data and verifying Roadway volumes with Station by Station Cross Section reports and Surface to Surface Volume calculations.

Mike Eason & Scott Bridges - Trimble

Trimble

4:15PM - 5:15PM

Sea Oats

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Dynamic Profiling: A Guide to Interactive Geometry

Back by popular demand, this session will focus on the interactivity between horizontal and vertical geometry. Dynamically tie profiles together to make a living-breathing design file as well as do sketch-level 3D modeling during a project’s concept phase. This session is great for those just getting started with Civil Tools and ORD.

Andrew Poszich & Thomas Anzelone - RS&H

OpenRoads Designer

4:15PM - 5:15PM

Sundial

Thursday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

SYNCHRO Design to Construction

Examine the challenges of moving from a 2D set of plans to a 3D model deliverable for construction. What is LOD? How does it impact design and impair or elevate construction interrogation of the design. How does one begin the process of making sure design intent is preserved yet allow the contractor to build a cost and process efficient project from a model.

Dan Sheldon - Bentley

Bentley SYNCHRO

4:15PM - 5:15PM

Dunes

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Understanding Terrain Models (Repeat)

Learn the tools and techniques behind these dynamic terrain models as well as the do’s and don’ts with managing multiple terrain models.

Christiana Holmes - Bentley

OpenRoads Designer

4:15PM - 5:15PM

Starfish

Thursday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Grading – It’s not just Dirt (Repeat)

This presentation introduces some non-corridor approaches to solving advanced grading problems.

Todd Holt - Bentley

OpenRoads Designer

Thursday Oct. 13 2022 Workshops

8:30AM - 12:00PM

Horizon

Thursday Workshop - $100

* TH-1-H

Novice - Expert

PDH Credits : 3

Seats Available:0

* TH-1-H: FDOT Connect – Traffic Plans

Fundamentals for developing Traffic Plans and utilizing FDOT Traffic Tools.

Errick Gray - ACEC

OpenRoads Designer

8:30AM - 10:45AM

Seahorse

Thursday Workshop - $75

* TH-1-SH

Novice - Expert

PDH Credits : 2

Seats Available:0

* TH-1-SH: Using and Editing Terrain Models

In this course you will review terrain model feature display and learn how to create thematic height displays. You will also learn how to create terrain models by importing graphic elements, identify and fix terrain model problems, and combine multiple terrain models together.

Sonya Pieterse - Bentley

OpenRoads Designer

8:30AM - 10:45AM

Sandcastle II

Thursday Workshop - $75

* TH-1-SC II

Novice - Expert

PDH Credits : 2

Seats Available:0

* TH-1-SC II: QuickStart for Geometry – Road

In this course, you will be creating a horizontal and vertical alignment using the OpenRoads Designer Geometry tools. You will learn how to create, edit, review and annotate geometric elements. This course will also cover working with existing ground terrain and aerial imagery as well as defining 2D/3D Views.

Jimmie Prow - Bentley

OpenRoads Designer

8:30AM - 10:45AM

Sandcastle I

Thursday Workshop - $75

* TH-1-SC I

Novice - Expert

PDH Credits : 2

Seats Available:0

* TH-1-SC I: Plans Production with OBM. Updated

Drawing, sheet models, section callouts, annotation scales, dynamic views, display styles are some of the features that we will review during this workshop so we can produce plans directly from the 3D model.

Steve Willoughby - Bentley

OpenBridge Designer

11:00AM - 2:30PM

Seahorse

Thursday Workshop - $75

* TH-2-SH

Novice - Expert

PDH Credits : 2

Seats Available:0

* TH-2-SH: Designing Inlets to Collect Runoff

In this class you will learn how to place inlets and delineate catchments, to collect runoff from a road surface. You will also learn how to evaluate whether the inlet efficiencies and the spread widths of the flows at the inlets are acceptable, and adjust the inlet positions to achieve this.

Kevin Lusterio - Bentley

OpenRoads Designer

11:00AM - 2:30PM

Sandcastle II

Thursday Workshop - $75

* TH-2-SC II

Novice - Expert

PDH Credits : 2

Seats Available:0

* TH-2-SC II: Defining Template End Conditions

This hands-on training teaches how to create and make template end conditions. This training focuses on the side slopes connecting the template hinge to the tie down point. You will learn how to create end conditions with multiple cut and fill slope solutions, cut slopes with a ditch adjacent to the hinge, walls, and forced right-of-way solutions.

Todd Holt - Bentley

OpenRoads Designer

11:00AM - 2:30PM

Sandcastle I

Thursday Workshop - $75

* TH-2-SC I

Novice - Expert

PDH Credits : 2

Seats Available:0

* TH-2-SC I: Analytical Design of Concrete Bridges

After modeling the bridge in OpenBridge Modeler, the next step is to perform the analytical design. Let’s use the interoperability with LEAP Bridge Concrete to analyze and design the bridge. Add the live loads, load combinations and come up with the proper strands arrangement and rebar reinforcement for your beams, piers and abutments.

Steve Willoughby - Bentley

OpenBridge Designer

1:30PM - 5:15PM

Horizon

Thursday Workshop - $100

* TH-2-H

Novice - Expert

PDH Credits : 3

Seats Available:0

* TH-2-H: FDOT Connect – Automated Quantities

This course details the FDOT Quantity workflow developed for the Summary of Quantity Reports required for the Estimated Quantities Report PDF. Learn to use the tools, assign pay item information to 2D and 3D design elements, calculate quantities and export quantity reports.

Richie Perez - ACEC

OpenRoads Designer

2:45PM - 5:15PM

Seahorse

Thursday Workshop - $75

* TH-3-SH

Novice - Expert

PDH Credits : 2

Seats Available:0

* TH-3-SH: Designing Pipes to Convey Runoff

In this class, you will learn how to design pipes to convey the runoff that has been collected by the inlets to an outfall. The pipes will be placed with an initial size and slope; then they will be designed hydraulically to calculate the sizes needed to accommodate flows without surcharging.

Christiana Holmes - Bentley

OpenRoads Designer

2:45PM - 5:15PM

Sandcastle II

Thursday Workshop - $75

TH-3-SC II

Novice - Expert

PDH Credits : N/A

Seats Available:12

TH-3-SC II: OpenBuildings Designer: Managing Spaces, Assests & Schedules of a 3D Transit Station

This new hands-on session contains exercises for getting started with Bentley’s BIM solution, OpenBuildings Designer.  The students will start with a partially completed BIM model of a small above ground transportation station and then add, create and manage intelligent building content.  Exercises start with Space Planning tools, placing transportation related furniture, fixtures and equipment, along with placing mechanical and plumbing systems and assemblies. Also, automatic drawing annotation and schedules will be explored.

Mark Enos - Bentley

OpenBuildings for Transportation

2:45PM - 5:15PM

Sandcastle I

Thursday Workshop - $75

* TH-3-SC I

Novice - Expert

PDH Credits : 2

Seats Available:0

* TH-3-SC I: Analytical Design of Steel Bridges

Built-up girders, cross frames, stiffeners, field splices, filler plates and shear studs are some of the elements that can be challenging in modeling a steel bridge. Moreover, all of that information needs to be transferred or duplicated when calculating the bridge in the analytical software. Let’s discover during this presentation how OpenBridge Designer brings interoperability to the back and forth between the physical and analytical model to streamline the process of modeling and designing a bridge.

Alex Mabrich - Bentley

OpenBridge Designer

Friday Oct. 14, 2022 General Sessions

8:30AM - 9:30AM

Sand Dollar

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Sustainability impacts & benefits for Digital Construction Workflows

Sustainability is becoming more and more of a priority with today’s increasing construction challenges. Whether it be funding, community asks, or local goals, sustainability is at the core of infrastructure development and digital construction workflows can help achieve these goals.
From concept to design & construction through to maintenance & operations, smart workflows contribute to sustainability. Trimble is building on this ethos, with integrated technologies that benefit environmental impact, and construction cost via reduction of CO2 emissions, improved efficiency & implementation efforts
In this session, we will be covering core technologies and workflows that underpin Trimble’s digital delivery workflow for an infrastructure project, while analyzing sustainable contributions at every step, with an active pilot example. The solutions in this workflow include planning software, site hardware, collaboration platforms, augmented reality, asset management.

Ev Tripolitis & Adrien Patané - Trimble

Trimble

8:30AM - 9:30AM

Starfish

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Enabling 3D Design Review and Collaboration with iTwin Design Review (repeat)

For years engineers have been designing in 3D but, with a lack of viable review tools, reviewers have been forced to review and certify on 2D sheets. Time allocation for design reviews continues to be compressed, leaving less and less time for design review preparation and duplication of design artifacts. Learn how iTwin Design Review enables a simplified, 2D/3D hybrid workflow for design review and collaboration. See how project teams can leverage a Digital Twin to easily share design context and provide review feedback on design deliverables through review, collaboration and quality tools.

Rob Riley - Bentley

Bentley iTwin

8:30AM - 9:30AM

Sawgrass

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Increase Efficiency- Steel Bridge Projects – Physical to Analytical Modeling and Design

Built-up girders, cross frames, stiffeners, field splices, filler plates and shear studs are some of the elements that can be challenging in modeling a steel bridge. Moreover, all of that information needs to be transferred or duplicated when calculating the bridge in the analytical software. During this presentation, let’s discover how OpenBridge Designer brings interoperability to the back and forth between the physical and analytical model to streamline the process of modeling and designing a bridge.

Alex Mabrich - Bentley

OpenBridge Designer

8:30AM - 9:30AM

Dunes

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT CADD Model Element Properties (repeat)

CADD Features built with Properties for Asset Information

Kandi Daffin - FDOT

FDOTConnect

8:30AM - 9:30AM

Sea Oats

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Item Types Enhancements in OpenRoads Designer 2022 Release 1

OpenRoads Designer 2022 Release 1 includes many Item Type enhancements. Learn how you can easily write expressions that include civil properties with the new Copy Expression and IntelliSense capabilities. Discover how to define station and offset expressions so they values are always up to date! No more need for the Asset Manager to calculate static station and offset values that must be updated manually. Many other enhancements such as conditional pick lists, single source of truth for drainage elements, and much more will also be discussed.

Sonya Pieterse - Bentley

OpenRoads Designer

8:30AM - 9:30AM

Sundial

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

BIM Enlivened – OpenBuildings Designer and LumenRT

Enrich your OpenBuildings Designer models to make them look more realistic with LumenRT’s  Digital Nature.  Immerse buildings within a real-time visualization environment populated with moving people, wind-swept plants with seasonal foliage, rolling clouds, rippling water, and animated vehicles.  Best Practices and Tips & Tricks will be covered.

Mark Enos - Bentley

OpenBuildings Designer

9:45AM - 10:45AM

Sundial

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Changing the Paradigm – Model-driven Deliverables

A discussion on model driven deliverables as a replacement for plans

Todd Holt - Bentley

BIM

9:45AM - 10:45AM

Starfish

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Custom Item types in OBM

Join us in this presentation as we will explore the use of item types in a bridge project context.

Alex Mabrich - Bentley

OpenBridge Designer

9:45AM - 10:45AM

Sea Oates

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT – General Workspace Setup Configuration and Troubleshooting (repeat)

Review of FDOT workspace setup, configurations, and general troubleshooting

Matt Sexton - FDOT

FDOTConnect

9:45AM - 10:45AM

Sawgrass

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Corridor Side Slope Design and Modeling (repeat)

This session focuses on practical ways to take advantage of the side slope modeling tools in OpenRoads Designer. Watch as we discuss and demonstrate various end condition capabilities in context of real-world examples. You’ll see examples of targeting 2D and 3D project features such as ROW and retaining walls, as well as matching slopes between corridors. In this session you will learn:
•How to use various methods to target model elements and control end conditions, •How to tie end conditions to model elements (such as walls, abutments, and special ditches), and •To use target aliasing, end condition exceptions, and other end condition methods to create side slopes.

Christiana Holmes - Bentley

OpenRoads Designer

9:45AM - 10:45AM

Sand Dollar

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Grading Parallel Surfaces

Review the geometry and mathematics of a surface’s breaklines to calculate its horizontal and vertical offset to provide a parallel duplication of the surface. This application can be used to develop surfaces such as subgrade, base, vegetative cover, etc..

Chuck Turlington - Geosyntec Consultants, Inc.

OpenRoads Designer

9:45AM - 10:45AM

Dunes

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Templates Deconstructed (Repeat)

The discussion will cover tips, techniques and challenges to consider when developing OpenRoads Designer workspaces.

Jordan Hatfield - Bentley

OpenRoads Designer

11:00AM - 12:00PM

Sawgrass

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Tips and Tricks using OpenBridge

This is a review of our most common questions asked during our training classes. How to model multiple piers in the same support line, use of point controls in decks, unit definitions, etc.

Alex Mabrich - Bentley

OpenBridge Designer

11:00AM - 12:00PM

Starfish

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Future: Digital Delivery (repeat)

Discussion of transportation industry and ultimate goal of FDOT CADD in reaching Model as the Legal Document

Vern Danforth - FDOT

FDOTConnect

11:00AM - 12:00PM

Dunes

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Best Practices for Model Management

In the ORD world where workflows and processes seem to be ever-evolving, this session outlines some best practices for managing your 3D models, whether it’s for a traditional plan set or NexGen. Join in to garner advice on model organization, file federation, template creation strategies, documentation tactics, and how to ultimately pull it all together for review and delivery.

Eddie Giese - Patel, Green & Assoc.

OpenRoads Designer

11:00AM - 12:00PM

Sea Oats

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Earthwork / Quantities

Earthwork / Quantities

Richard Perez - 3D Highway Engineering

OpenRoads Designer

11:00AM - 12:00PM

Sand Dollar

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Trouble Shooting and Tips for Workspace Development

The discussion will cover tips, techniques and challenges to consider when developing OpenRoads Designer workspaces.

Todd Holt - Bentley

OpenRoads Designer

11:00AM - 12:00PM

Sundial

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Power Tools: Take control of your CONNECT and V8i title blocks and reference files!

Title Block Manager and RefManager

Remove the time, frustration, and uncertainty of dealing with title blocks and reference files in OpenRoads Designer and other Bentley applications using Axiom’s Title Block Manager and RefManager power tools. Effortlessly renumber all your sheets, updating the text or tags in every title block automatically. Find title block problems early and easily fix them before they delay your submittals. Report on and fix missing reference attachments and change other reference settings in any number of DGN files. Get detailed reports on reference files and their settings to instantly find out about problems before they become a submittal-blocking emergency. Save considerable time on every MicroStation project, starting with your current one.

Dan Kelly - Axiom

Axiom - Title Block Manager and RefManager

1:30PM - 2:30PM

Sawgrass

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Advanced Techniques with Quantities and Earthworks

This presentation will cover the many nuances with computing quantities and calculating earthwork such as unsuitable materials, multiple substrata, and complex volumes

Todd Holt - Bentley

OpenRoads Designer

1:30PM - 2:30PM

Sundial

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Structures: Workflow Updates (repeat)

Important new updates to various tools for Bridge Design, Modeling and Plans Production

Heather Piorun - FDOT

FDOTConnect

1:30PM - 2:30PM

Sand Dollar

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

Tips and Tricks for Automated Quantities on RRR Projects

Learn some of the issues encountered with automated quantities for a RRR concrete rehabilitation project in OpenRoads Designer and how to run quantities without a 3D model. Includes overview of the FDOT automated quantities workflow, item types, takeoff manager, summary report creation and producing the estimated quantities report.

Andrew Byrd - RS&H

OpenRoads Designer

1:30PM - 2:30PM

Starfish

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Traffic Tool Update (repeat)

Review of FDOT Traffic Tools

Randy Roberts - FDOT

FDOTConnect

1:30PM - 2:30PM

Sea Oats

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Modeling Retaining Walls

This presention will discuss modeling various types of retaining walls in ORD. We will demonstrate how to create templets for MSE Walls that automates most of the modeling. There will also be a heavy focus on the importance of collaboration between the roadway design team and structures design team when performing these types design.

Adam Moorman - Mead & Hunt

OpenRoads Designer

1:30PM - 2:30PM

Dunes

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Above and Beyond Corridor Modeling (repeat)

A “deep dive” presentation into corridor modeling methods that you may have never thought possible.

Jordan Hartfield - Bentley

OpenRoads Designer

2:45PM - 3:45PM

Sand Dollar

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Today’s Plans – Tomorrow’s Models

Building Information Modeling (BIM) is the process of delivering and operating built assets using well-structured digital information that all the necessary parties have access to. This presentation discusses how OpenRoads Designer helps you deliver BIM models

Todd Holt - Bentley

BIM

2:45PM - 3:45PM

Sundial

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT Structures: Automated Bridge Quantities (repeat)

How to build the Summary of Structures from OpenBridge Modeler with FDOTConnect

Kandi Daffin - FDOT

FDOTConnect

2:45PM - 3:45PM

Sawgrass

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT CADD QC (repeat)

FDOT reviews tools and procedures for CADD Compliance inside OpenRoads Designer

Brandon Welch - FDOT

FDOTConnect

2:45PM - 3:45PM

Starfish

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

FDOT CADD Delivery; including BIM files for Earthwork (repeat)

Overview of CADD Delivery requirements and new updates to the CADD Manual

John Mark Palacios - FDOT

FDOTConnect

2:45PM - 3:45PM

Dunes

Friday-General Session

Novice - Expert

PDH Credits : 1

Seats Available:Open Seating

* Modeling Rebar in OpenBridge Modeler

Learn about modeling Rebar in OpenBridge Modeler

Steve Tissier - Atkins

OpenBridge Modeler

2:45PM - 3:45PM

Sea Oats

Friday-General Session

Novice - Expert

PDH Credits : N/A

Seats Available:Open Seating

What Everyone Should Know about Civil AccuDraw (repeat)

Every quality toolbox includes specialty tools that simplify specific tasks. You don’t need specialty tools all the time, but they offer substantial benefit when used purposefully. Civil AccuDraw is one of those tools. During this session we will discuss situations where Civil AccuDraw brings efficiencies that can be difficult with other tools.

Jordan Hartfield - Bentley

OpenRoads Designer

Friday Oct. 14, 2022 Workshops

8:30AM - 10:45AM

Horizon

Friday Workshop - $75

* F-1-H

Novice - Expert

PDH Credits : 2

Seats Available:0

* F-1-H: FDOT Connect – Existing Modeling

Creating a 3D model for existing features to include; hard surfaces, utilities, drainage structures, and soil borings.

Eddie Giese-ACEC

OpenRoads Designer

8:30AM - 12:00PM

Seahorse

Friday Workshop - $100

F-1-SH

Novice - Expert

PDH Credits: N/A

Seats Available:1

F-1-SH: AccuDraw Basics

In this course, you will learn how to navigate in 2D and 3D design space using AccuDraw. You will learn the basic features, functionality, usage and related settings and shortcuts required for this purpose. This geometrically translates into relocation of the origin and reorientation of the coordinate axes.Starting from the need for a coordinate system, its types and role in the modeling process; its embodiment in AccuDraw is laid out. The main parts of AccuDraw – the Compass and the Coordinate Window – and their role are covered. Besides the main function, other conveniences provided by AccuDraw are also covered like the auto placement of point, context-based change of mode and orientation of axes, access to snap modes, tool settings etc. which add to the speed and thus efficiency.

Steve Rick - Bentley

MicroStation CONNECT

8:30AM - 10:45AM

Sandcastle II

Friday Workshop - $75

F-1-SC II

Novice - Expert

PDH Credits : N/A

Seats Available:0

F-1-SC II: Using Parametric Solids, Constraints, Variables and Variants

This course contains exercises that will assist experienced 2D MicroStation users become familiar with 3D tools and concepts, specifically parametric solids, 2D and 3D constraints, variables, variants and parametric cells within the MicroStation CONNECT Edition.

Dave Mayer - Bentley

MicroStation CONNECT

8:30AM - 12:00PM

Sandcastle I

Friday Workshop - $100

* F-1-SC I

Novice - Expert

PDH Credits : 3

Seats Available:0

* F-1-SC I: Introduction to Drainage Layout and Hydraulics

In this course we cover creating and designing a highway drainage system consisting of Inlets, Manholes, Outlets, Pipes, and Drainage Areas.

Kevin Lusterio - Bentley

OpenRoads Designer

11:00AM - 3:45PM

Horizon

Friday Workshop - $100

* F-2-H

Novice - Expert

PDH Credits : 3

Seats Available:16

* F-2-H: FDOT Connect – Digital Delivery Design Review

This workshop will provide knowledge, informationand updates on FDOT requirements for model-centric designs, delivering BIM files as legal contract documents, QA/QC of BIM files, and Design Review of BIM files.

Errick Gray - ACEC

OpenRoads Designer

11:00AM - 3:45PM

Sandcastle II

Friday Workshop - $100

F-2-SC II

Novice - Expert

PDH Credits : N/A

Seats Available:0

F-2-SC II: MicroStation CONNECT Edition Tips and Tricks

MicroStation CONNECT Edition Tips and Tricks

Dave Mayer - Bentley

MicroStation CONNECT

1:30PM - 3:45PM

Seahorse

Friday Workshop - $75

* F-2-SH

Novice - Expert

PDH Credits : 2

Seats Available:0

* F-2-SH: Site Modeling and Non-Corridor Modeling

The intent of this course is to demonstrate how to turn 2D elements into 3D elements by adding profiles and elevations to civil elements that are typically found outside the limits of a roadway corridor (i.e. civil sites, building pads, parking lots, ponds, infield grading, bridge abutment grading, etc.) In this course you are going to learn how to create 3D elements (or features) and Proposed Terrains using fundamental site modeling and non-corridor modeling techniques. We will utilize the vertical geometry tools along with linear templates and the terrain modeling tools throughout this course. In the first part of the course you are going to learn how to grade a cell tower site that is made up of a tower pad, yard and driveway. The second part of the course you will learn how to create an infield pond between corridors.

Sonya Pieterse - Bentley

MicroStation CONNECT

1:30PM - 3:45PM

Sandcastle I

Friday Workshop - $75

* F-2-SC I

Novice - Expert

PDH Credits : 2

Seats Available:0

* F-2-SC I: Importing Drainage from Excel Data

In this course, you will learn how to use ModelBuilder connections and mappings to import drainage data from Excel spreadsheets and build a 3D drainage model. You will then learn how to use ModelBuilder to import updated spreadsheets to update the 3D model.

Christiana Holmes - Bentley

OpenRoads Designer

My Agenda (Cart)